How to flip a table in Word 10.

1. How to rotate the table in the Word? Practical lesson!
2. Here, in the “Instructions for Word 2003” section, this is not about a coup, but about turning the text
3. There is another option how to flip the text in the Word. Go to the tab "Insert", select the menu "Inscription" and in the drop-down menu "Draw an inscription"
4. On the tab “Home” we find in the menu item “Paragraph”, select the icon lower border, click and select the line “No borders”
5. = TRANSPORT ()

To do this, go to the “Home” tab and in the “Paragraph” subsection select “No borders”. 3. Without going beyond the table editor, re-select the table with the mouse and copy it to the clipboard. Insert an inverted table into the document.

For those who work with documents in which there are tables, it can be a big mystery how to turn these tables, if such a need arises. If a table is created from scratch, then it can be immediately turned upside down simply by changing the direction of the text in the table, as we did in the article “how to write text vertically in a word”. Of course, many see the solution to this issue in changing the orientation of the page to the landscape one, but the table will remain horizontal as it was.

How to be? To begin to enjoy, if you have a 2013 word and start feeling sad if 2010, 2007 and 2003, you have to dance with a tambourine there. The easiest way to turn a page is to insert it using an inscription in Word 2013, which allows you to rotate this text as you like. Your table will be inserted, but the columns and rows will be swapped. Please note that if you copy the table without borders or the borders of the table are partially, do not forget to insert all the borders of the table in the Excel itself.

As you can see at least turn the tables standard means Word and can not, but to get out of this situation can be quite simple. And the whole sheet unfolds, becomes landscape. Go to Text Document by opening it in the Word and select the table you need, holding down the left mouse button. After that, copy it to the clipboard.

Open MS Excel, which always comes in a package. Microsoft Office . To do this, click on one of the cells with the right mouse button and select the "Paste Special" option.

How to rotate the table in the Word? Practical lesson!

If you need to rotate the table by 90 degrees, you should change landscape orientation sheet on which it is located. First, select the text and the table you want to move and go to the Page Layout tab. In the settings window that will open, on the General tab, select landscape orientation.

As a program for text recordings, you can use the most ordinary notepad, and you can use Word - one of the most ingenious. text editors Invented over the past few decades.

Here, in the “Instructions for Word 2003” section, this is not about a coup, but about turning the text

You are welcome! Wanted to insert a picture into the text? And this will not be a problem! However, people face difficulties, most often due to ignorance. Tell me honestly, do you know how to turn the text in Word? It is unlikely, because in this case, you probably would not have appeared on this page and would not have read this article.

To them, you circle the necessary part of the text that you plan to flip. Now select it, click “Format” - “Text direction” and in the opened window select one of the directions. In this case, just turning the monitor will do - so that it is more convenient to write a book.

In such cases, often the only way out is to transpose the tables, that is, to change their orientation by replacing the rows with columns. You should not be afraid of the conditions of distribution of the product, because you can use the plugin for fifteen days without registering the program.

WrdTools allows you to transpose any tables, including those with an irregular structure (with an unequal number of cells in the rows). In this case, the table may contain merged cells or only by columns, or only by rows.

2. In the window that opens, select the preferred transpose mode. 3. Click the OK button to start the process of transposing tables. It would seem that there is nothing unusual in this action, but this function (inverted text) is very rarely used. Let's start, first you need to go to the Insert tab and select the Table menu, right-click on it and select the “Draw a table” option.

There is another option how to flip the text in the Word. Go to the tab "Insert", select the menu "Inscription" and in the drop-down menu "Draw an inscription"

That is what should end up. I called my friends and told me how to turn the text in Word 2007, changing directions in other versions is not significantly different from the above method. Then we draw a region and type the necessary text in it, a new Format tab appears, select the Text Direction icon in it, click on it to change the text direction.

If you want to create a vertical table on book page and, say, next to it to write the text, then this option is no good. MS Word is a popular program that helps solve complex problems with text layout.

This can be done in two ways: right-click on the selected area and select "Copy", or use the Ctrl + C hot key combination. Find the item “Transport” and mark it. Press "Next". Word, unlike the most ordinary notebook, allows you to create literally everything you want with letters.

On the tab “Home” we find in the menu item “Paragraph”, select the icon lower border, click and select the line “No borders”

The main thing is not to start panicking, but to finish reading the written text to the end. Immediately, we note that if you have questions about this article, you can ask them using comments. By the way, the frame can be made wider, otherwise the text may not fit. And the last moment - the frame must be removed.

About how to do this simple operation and tells our today's material. There are several exits here - and not one convenient one. Recently, my friends called me and they shocked me with their question. Office developers found it inappropriate to display this action on the right mouse button after selecting the desired piece of text. For random selection degrees of text flipping, at the stage when the text area is selected, you can rotate the area at any angle by clicking on the point located in the middle.

The question was how to turn the text in Word and make it as fast as possible. I looked through the tabs to the tables in 2010 - it seems not much different from 2007. Row values ​​will go into columns and vice versa. First you need to create a table, for which click on the item with the same name and select “Draw a table” in it. In the line "Apply" put "To the selected text."

18 March 2016

Sometimes when working in spreadsheet editor MS Excel, we meet with a simple at first glance task: transposing a table . Simply put, "turning over" the table from vertical to horizontal position, or vice versa.

It is not difficult at all to do this - just select the “old” table, copy its contents (Ctrl + C), then move the mouse cursor to the free cell of the table and right-click in it.

All you have to do is paste the copied cells using a special paste option, which is called “ Transpose (A) ”.

The transposed table will be copied as an independent editable copy, while all the formatting, as well as formulas from the “old” table, will also be in the “new” one. As you can see, the way is simple, and covers 99% of all user needs.

However, sometimes we need not just to create a transposed copy of the table, but to create a table dependent on the original using the transposition method. For example, if you have a rather impressive “vertical” table with calculations, and you need to display in a more convenient horizontal form only a part of its data (that is, create a demo table), taking into account that the data in the source table change over time.

In this case, it's time to turn to the hidden power of MS Excel, which is in the functions. We need only one of them:

= TRANSPORT ()

= TRANSPOSE ()

As it is not difficult to guess, the function also performs the tasks of transposition, however, it makes it a little different from the above variant.

And I warn you - it does not differ in simplicity.

1. Highlight several on MS Excel sheet empty cells , exactly the size of the data that you are going to fit into them. If the original “vertical” table includes 2 columns and 5 rows, then your selection should contain the same number of cells, but exactly the opposite. That is, 5 columns and 2 rows.
2. Place the mouse cursor in the formula bar and type = TRANSPORT, and then specify the range in brackets - just select our source table with the mouse. It's easier to use the MS Excel hint, which will appear as soon as you start entering the name of the function.
3. Now the element of magic. If after entering all the data just click on enter, instead of a copy of the table, Excel will show you an error. You must enter the data in the same way as an array formula, that is, with the key combination SHIFT + CTRL + Enter . Just click the specified combination when done with the selection of the source table.

That's all ready - transposed function = TRANSPORT () table inserted on the sheet. Didn't I tell you that it will be inserted without the original formatting? Then fix it. This was done on purpose - going back to the example above, in your demo table, a completely different design style may be applied, which has nothing to do with the original one.

Please note that the “new” and “old” tables are dependent - by changing the value in the “old”, you change it in the “new”. This connection is one-way - you cannot change something in the source data by editing their copy.

You may also be interested in:

To write an answer: